I went into our warehouse and grabbed a Cruiser License Plate Frame # CR15350 you referenced to check if this item comes with the tabs on the back. It does, in fact, feature a tab on either side near the bottom to help prevent the license plate from rattling while you travel.
Another product you may be interested in is the Cruiser Locking Star Pin Fasteners # CR81200. These fasteners deter the theft of your license plate and plate frame with a star-shaped keyhole and special key that is... view full answer...
I hate to put a damper on such a pleasant message (which finds us very well, thank you) the Denver Broncos NFL 3-D License Plate Frame # FTF020 is unable to be customized. As you mentioned however, it is a great product that customers seem to really enjoy due to how unique it is. I've added a link to a video review of the license plate frame for you to take a look at. view full answer...
The Anti-Rattle Fasteners for License Plate Frames # CR81400 that you referenced is designed for license plates that install using only two bolts. The washers go on either side of the plate that is secured with the two bolts to prevent the rattle. view full answer...
I believe you are referring to the Diamondesque License Plate Frame - Chrome and Clear # CR18130 that you were looking at. This is sold as a single frame so you would need a quantity of two if you wanted one for the front and the back of your vehicle.
I recommend adding anti-theft hardware to deter theft of your license plates and covers. You will want to check your current hardware and match up accordingly with the following options: Star Pin Locking Fasteners (round nuts) # CR81300 or... view full answer...
The Tuf Combo License Plate Frame # CR62034 that you referenced is sold individually. If you needed a pair you would need to order a quantity of 2. view full answer...
There was a design change for the Florida State Seminoles license plate frame # CTF306. I have included a picture of what it looks like. The lettering is now the red/garnet color and the word "Seminoles" is in a different font. view full answer...
The Ram License Plate Frame # CR11135 that you referenced is sold individually. Since you only need one cover this would work well for you.
For caps to cover the install hardware you can also use the part # CR82630. view full answer...
LED trailer tail light # STL57RB does not come with a license plate bracket but it does have a license plate lens at the bottom. You can use license plate mount bracket # LP10SB with this tail light. view full answer...
Yes, the license plate bracket of the Thule Arcos Enclosed Cargo Carrier # TH25YE does have a light on it to illuminate the license plate. view full answer...
The screws for mounting the license plate that come with the Enclosed Cargo Trailer License Plate Holder # LP35BB are 1/4" screws with a coarse (20 threads per inch) thread style.
Attached is a review video for you to check out. view full answer...
I checked with CE Smith and license plate holder # CE26053A does not have the holes in it to mount a light. The picture in question is meant to show the tread plate construction. For a similar metal license plate mounting bracket that does have additional mounting holes go with # LP15SB. view full answer...
The Optronics Heavy Duty Trailer License Plate Mount Bracket # LP15SB does not include mounting hardware. You will need to re-use your existing hardware or choose new hardware.
This plate mount is intended for full size license plates but you can check the included photo with dimensions to see if it will work to your satisfaction with a small plate. view full answer...
I went out to our demo area and personally checked the lights on the GearDeck 17 Enclosed Cargo Carrier # H00604. While there isn't a specific white light that shines down on the license plate the red lights for the other functions do illuminate that area slightly so the license plate would not be complete in the dark at night. For greater visibility you could splice in an LED license plate light, # LPL31CB, and be in compliance for sure. view full answer...
The light on the Optronics License Plate Light # LP55CB is an incandescent light and it is not waterproof.
I do have six license plate lights that are submersible (waterproof) and they are all incandescent lights. I am sending a link to the page that will show the six choices available. view full answer...
Yes. On the Westin Diamondstep Replacement Bumper, # 71000-94400, for a 1987 Toyota Pickup, there are mounting points for a license plate. The are difficult to see in the picture on the product page because of the chrome plated finish on the bumper, but they are there. You will not need to drill into the bumper or use a relocation kit.
We have several other bumper options for your truck. I have included a link to them for you to view. You can see the license plate mounting locations more... view full answer...
The Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR includes locks for the box and the rack. You can purchase tail lights and license plate holder with the part License Plate and Tail Light Relocation Kit for Yakima EXO System part # Y74VR. This includes the tail lights, a place to mount your license plate, and the wiring that you need to plug into a 4-way on your vehicle.
If you don't already have a 4-way on your vehicle, let me know your year make and model and I can tell you... view full answer...
The Peterson License Plate Light part # PM436B does not come with hardware. It will require a few screws to attach to bracket to the trailer and then a few nuts and bolts to attach the plate to the bracket. This is very common hardware that could be obtained locally without issue. view full answer...
The Westin Ultimate Bull Bar, part # 33-0885, will fit your 1999 Ford Ranger. It does include a mounting kit that will include all of the mounting hardware.
If there is a plastic shroud on the front of your Ranger it will have to be removed for the Westin Bull Bar to fit. Also, if you have a front license plate it may partially cover the license plate. If needed, you can use the Westin License Plate Relocation Bracket, part # 32-0055, to relocate your license plate. view full answer...
The bulbs in the Yakima license plate kit for Rack and Roll trailers # 8880166 uses incandescent bulbs. The bulbs are replaceable and can be obtained at any auto parts store. view full answer...